©m        ¦W

½² ©¾ ¨@  TSAY CHUNG-BIAU

¹q        ¸Ü

¶Ç        ¯u

E-mail

¾        ºÙ

Á¿®y±Ð±Â

¾Ç        ¾ú

¾á¥ô½Òµ{

¾¦½ü­ì²z»PÀ³¥Î

¾¦½ü³]­p¡B¤ÀªR¡B»s³y»P´ú¸Õ¡BCAD/CAM

¦UÃþ¾¦½ü¤§³]­p¡B¤ÀªR»s³y»P´ú¸Õ¡B´õ¨÷¤Î¾¦½ü¬¦¤§³]­p»P¤ÀªR

¸g¾ú

n           ©ú·s¬ì§Þ¤j¾Ç¾÷±ñ¤uµ{¨t/ºë±K¾÷¹q¬ã¨s©Ò ±Ð±Â/Á¿®y±Ð±Â

n           ¥æ³q¤j¾Ç ¾÷±ñ¤uµ{¨tÁ¿®y±Ð±Â

n           ¸gÀÙ³¡§Þ³N³B­Ý¥ôÅU°Ý

n           °ê¬ì·| ­Ý¥ôÅU°Ý

n           °ê¬ì·| ¤uµ{³B³Bªø

n           ±Ð¨|³¡ÅU°Ý«Ç­Ý¥ôÅU°Ý/«tij©e­û

n           °ê¬ì·| ¤uµ{³B¾÷±ñ©T¤O ¾Çªù¥l¶°¤H

n           ¥æ³q¤j¾Ç Á`°Èªø

n           ¤é¥»¤u·~¤j¾Ç¾÷±ñ¤uµ{¾Ç¬ì«È®y¬ã¨s­û

n           ¥æ³q¤j¾Ç ¥D¥ô¯µ®Ñ

n           ¥æ³q¤j¾Ç ¾÷±ñ¤uµ{¨t©Ò¨t¥D¥ô­Ý©Òªø

n           ¥æ³q¤j¾Ç ¾÷±ñ¤uµ{¨t©Ò°Æ±Ð±Â¢¬±Ð±Â

n           ¬ü°ê¥ì§Q¿Õ¤j¾Ç¾÷±ñ¤uµ{¨t©Ò ¬ã¨s§U²z

n           69¦~«×±Ð¨|³¡¤½¶O¯d¦Ò¤Î®æ­u¬ü¶i­×

¡@

µÛ§@
¤Î
½×¤å

 A.             REFERRED PAPERS 

1.          R. T. Tseng and C. B. Tsay, 2005, ¡§Undercutting and Contact Characteristics of Cylindrical Gears with Curvilinear Shaped Teeth Generated by Hobbing,¡¨ ASME Journal of Mechanical Design. (accepted)

2.          C. F. Chen and C. B. Tsay, 2005, ¡§Tooth Profile Design for the Manufacture of Helical Gear Sets with Small Numbers of Teeth,¡§ International Journal of Machine Tools and Manufacture, Vol. 45, pp. 1531-1541.

3.          R. T. Tseng and C. B. Tsay, 2005, ¡§Mathematical Model and Surface Deviation of Cylindrical Gears with Curvilinear Shaped Teeth Cut by a Hob Cutter,¡¨ ASME Journal of Mechanical Design vol.45, pp.982-987.

4.          R. T. Tseng and C. B. Tsay, 2004, ¡§Contact Characteristics of Cylindrical Gears with Curvilinear shaped teeth,¡¨ J. of Mechanism and Machine Theory, Vol.39, pp.905-919.

5.          C. F. Chen and C. B. Tsay, 2004, "Computerized Tooth Profile Generation and Analysis of Characteristics of Elliptical Gears with Circular-Arc Teeth," J. of Materials Processing Technology, Vol. 148, N. 2, pp. 226-234.

6.          J. S. Lo, C. H. Tseng and C. B. Tsay, 2003, ¡§Non-undercutting Conditions of Roller Gear Cams,¡¨ Transactions of the CSME (Canada), Vol. 26, No.4, pp. 413-425.

7.          J. L. Wu, C. C. Liu, C. B. Tsay and S. Nagata, 2003, ¡§ Mathematical Model and Surface Deviation of Helipoid Gears Cut by Shaper Cutters,¡¨ ASME Journal of Mechanical Design, Vol. 125, pp. 351-355.

8.          C. F. Chen, and C. B. Tsay, 2003, "On the Design of Helicoid Cycloidal Gears with Rotor Profiles," J. of CSME, Vol. 24, No. 1, pp. 27-37.

9.          C. C. Liu and C.B. Tsay, 2002, ¡§ Mathematical Models and Contact Simulations of Concave Beveloid Gears,¡¨ ASME Journal of Mechanical Design, Vol. 124, pp.753-760

10.       C. F. Chen, H. T. Lin, and C. B. Tsay, 2002, "Mathematical Model and Undercutting Analysis of Modified Helical Gears with Smaller Number of Teeth," J. of CSME, Vol. 23, No. 4, pp. 301-311.

11.       C. C. Liu and C.B. Tsay, 2002, ¡§Contact Characteristics of Beveloid Gears,¡¨ Mechanism and Machine Theory, Vol. 37, No. 4, pp. 333-350.

12.       Y. C. Chen and C. B. Tsay, 2002, ¡§Stress Analysis of a Helical Gear Set with Localized Bearing Contact,¡¨ Finite Elements in Analysis and Design, Vol.38, pp.707-723.

13.       ¼B®a¹ü, ½²©¾¨@, 2002, ¡§º¥¶}½u¶êÀ@¾¦½ü²¤¶¤Î¨ä±µÄ²¼ÒÀÀ¡¨, ¾÷±ñ¤ë¥Z, Vol.28, No.5, pp.18-25.

14.       ªL­×¦P, ½²©¾¨@, 2002, ¡§¤p¾¦¼ÆÁ³±Û¾¦½ü²¤¶¡¨, ¾÷±ñ¤ë¥Z, Vol.28, No.5, pp.26-34.

15.       C. C. Liu and C.B. Tsay, 2001,¡¨Tooth Undercutting of Beveloid Gears,¡¨ ASME Journal of Mechanical Design, Vol.123, No.4, pp.569-576.

16.       R. T. Tseng and C. B. Tsay, 2001, ¡§Mathematical Model and Undercutting of cylindrical gears with curvilinear Shaped teeth,¡¨ J. of Mechanism and Machine Theory, Vol.36, pp.1189-1202.

17.       C. C. Liu and C.B.Tsay, 2001, ¡§Mathematical Models of Beveloid Gears Generated by Taper Hobbing and Infeed Grinding,¡¨ Journal of CSME, Vol.22 No.3, pp.177-186.

18.       Y. C. Chen and C. B. Tsay, 2001, ¡§Mathematical Model and Undercutting Analysis of Modified Circular-Arc Helical Gears,¡¨ J. of CSME, Vol.22, No.1, pp.41-51.

19.       Y. C. Chen and C. B. Tsay, 2001, ¡§ Bearing Contact of a Helical Gear Pair with Involute Teeth Pinion and Modified Circular-Arc Teeth Gear,¡¨ J. of Mechanical Engineering Science, Proceedings of the Institution of Mechanical Engineers Part C, Vol.215, pp.1175-1187.

20.       J. L. Chen, C. H. Tseng and C. B. Tsay, 2001, ¡§Bearing Contact of the Involute Spur Planetary Gear Train,¡¨ Transactions of CSME (Canadian) , Vol.25, No.2, pp.163-190.

21.       C. S. Rou, C. H. Tseng and C. B. Tsay, 2001, ¡¨A Study on the Bearing Contact of the Roller Gear Cam,¡¨ Computer Methods in Applied Mechanics and Engineering, Vol.190, pp.4649-4662.

22.       Y. C. Chen and C. B. Tsay, 2001, ¡§Contact Ratios and Transmission Errors of a Helical Gear Set with Involute-Teeth Pinion and Modified-Circular-arc-Teeth Gear,¡¨ JSME International Journal, series C, Vol. 44, No. 3, pp. 867-874.

23.       Y. C. Lin, C. B. Tsay and Z. H. Fong, 2001,¡¨ Computer-Aided Manufacturing of Spiral Bevel and Hypoid Gears by Applying Optimization Techniques,¡¨ J. of Materials Processing Technology, Vol. 114, pp. 22-35.

24.       B. W. Bair and C. B. Tsay, 2001, ¡§Effects of Profile Shifted Factor and Pressure Angle on the ZK-Type Dual-Lead Worm Gear Drives,¡¨ J. of Materials Processing Technology, Vol. 112, pp. 29-36.

25.       H. S. Fang and C. B. Tsay, 2000, ¡§Mathematical Model and Bearing Contacts of the ZN-type Worm Gear Set Cut by Oversize Hob Cutters,¡¨ J. of Mechanism and Machine Theory, Vol. 35, pp. 1689-1708

26.       Y. C. Chen and C. B. Tsay, 2000, ¡§Tooth Contact Analysis and Kinematic Optimization of a Modified Helical Gear Pair with Involute-Teeth Pinion and Modified-Circular-Arc-Teeth Gear,¡¨ J. of CSME, Vol. 21, No. 6, pp.537-547.

27.       J. L. Chen, C. H. Tseng and C. B. Tsay, 2000, ¡§A study on Kinematic Transmission Errors of the Planetary Gear Train with the Crowned Planetary Gear,¡¨ Proceedings of the Institution of Mechanical Engineers-Part C: J. of Mechanical Engineering Science. (accepted).

28.       C. B. Tsay, W. Y. Liu and Y. C. Chen, 2000, ¡§Spur Gear Generation by Shaper Cutters,¡¨ J. of Materials Processing Technology, Vol. 104, pp. 271-279.

29.       C. B. Tsay and Y. C. Chen, 2000, ¡§Divulgence and Thermal Expansion of Root¡¦s Pumps,¡¨ J. of CSME, Vol. 21, No. 6, pp.549-554.

30.       C. K Chang and C. B. Tsay, 2000, ¡§Mathematical Model of Straight Bevel Gears with Octoid From,¡¨ J. of CSME, Vol. 21, No. 3, pp. 239-245.

31.       C. B. Tsay and R. T. Tseng, 2000, ¡§Tooth Contact Analysis of Spur Gear Pair with Pinion Involute Teeth and Gear Cycloidal Teeth,¡¨ J. of CSME, Vol. 21, No. 3, pp. 229-237.

32.       C. B. Tsay and C. K. Chang, 2000, ¡§Mathematical Modal and Contact Analysis of Pin-gearing,¡¨ J. of CSME, Vol. 21, No. 2, pp. 139-146.

33.       B. W. Bair and C. B. Tsay, 1999, ¡§Sensitivity Analysis and Surface-Deviation Minimization of ZK-Type Dual-Lead Worm Gear Drives,¡¨ Trans. ASME, J.of Mechanical Design, Vol.121, No.3, pp.409-415.

34.       J. L. Chen, C. H.Tseng and C. B. Tsay, 1999, ¡§Tooth Contact Analysis of the Involute Spur Planetary Gear Train, ¡¨ J. of CSME, Vol.20, No.4, pp.317-324.

35.       ½²©¾¨@, ¤ý§ÓµØ, 1999, ¡¨­×¾ã«¬Á³±Û¾¦½ü¤§±µÄ²¤ÀªR¡¨, ¾÷±ñ¤ë¥Z(²Ä¤Q¥|©¡ª÷µ§¼ú¨Î§@), Vol. 25, No. 9, pp. 322-330.

36.       H. S. Fang and C. B. Tsay, 1999, ¡¨ Object-Oriented Modeling Technique Application to the Worm Gear set Development, ¡¨ International Journal of Modeling and Simulation, Vol.19, No.1, pp.41-44.

37.       W. H. Wang, C. H. Tseng, and C. B. Tsay, 1999, ¡§ On the Optimization of Spatial Cam Mechanisms considering Mechanical Errors, ¡§ International Journal of Modeling and Simulation, Vol.19, No.1, pp.94-100.

38.       C. B. Tsay and Y. C. Chen, 1998, ¡§Characteristic study on the Lobe Profile of Root¡¦s Pumps,¡¨ Journal of Applied Mechanism and Robotics (accepted).

39.       B. W. Bair and C. B. Tsay, 1998, ¡§ZK-type Dual-Lead Worm and Worm Gear Drives: Geometry, ¡¨ Trans. ASME, J. of Mechanical Design, Vol.120, No.3, pp.414-421.

40.       B. W. Bair and C. B. Tsay, 1998, ¡§ZK-type Dual-Lead Worm and Worm Gear Drives: Contact Teeth, Contact Ratios and Kinematic Errors, ¡¨ Trans. ASME, J. of Mechanical Design, Vol.120, No.3, pp.422-428.

41.       C. Y. Lin , C. B. Tsay and Z. H. Fong, 1998, ¡¨ Computer-Aided Manufacturing of Spiral Bevel and Hypoid Gears with Minimum Surface-Deviation, ¡¨ Journal of Mechanism and Machine Theory, Vol.33, No.6, pp.785-803.

42.       S. L. Chang and C. B. Tsay, 1998, ¡§Computerized Tooth Profile Generation and Undercut Analysis of Noncircular Gears Manufactured with shaper Cutters, ¡¨ Trans. ASME, J. of Mechanical Design, Vol.120, No.1, pp.92-99.

43.       ±i«H¨},½²©¾¨@,1997,¡¨«D¶ê§Î¾¦½ü¤§³Ð¦¨¤Î¨ä¾¦§Î¡¨,¾÷±ñ¤ë¥Z(²Ä¤Q¤G©¡ª÷µ§¼ú¨Î§@),Vol. 23, No. 12, pp. 216-222.

44.       W.H. Wang, C.H. Tseng, and C. B. Tsay, 1997, ¡¨ The Analysis of Preload Condition in Positive-Drive Spatial Cam Mechanism,¡¨ J. of CSME, Vol.18, No.4, pp. 311-319.

45.       C. Y. Lin, C. B. Tsay and Z. H. Fong, 1997, ¡§ Mathematical Model of spiral Bevel and Hypoid Gears Manufactured by the Modified Roll Method,¡¨ Journal of Mechanism and Machine Theory,Vol 32 ,No.2,pp. 121-136.

46.       S. L. Chang, C. B. Tsay and C. H. Tseng, 1997, ¡§Kinematic Optimization of a Modified Helical Gear Train,¡¨ Trans. ASME, J. of Mechanical Design, Vol.119,No.2, pp.307-314.

47.       W. H. Wang, C.H. Tseng and C. B. Tsay, 1997, ¡§Surface Contact Analysis for a Spatial Cam Mechanism,¡¨ Trans. ASME, J. of Mechanical Design, Vol.119,No.2, pp.169-177.

48.       S. L. Chang, C. B. Tsay and S.Nagata, 1997, ¡§ A General Mathematical Model for Gears Cut by CNC Hobbing Machines,¡¨  Trans. ASME, J. of Mechanical Design, Vol.119, No.1, pp.108-113.

49.       S. L. Chang, C. B. Tsay and C.H.Tseng, 1996, ¡§A Study on Kinematic Optimization of Simple Helical-Gear Trains,¡¨ J. of CSME. Vol. 17, No. 6, pp.577-585.

50.       C. Y. Lin, C. B. Tsay and Z. H. Fong, 1996, ¡§ Contact Pattern Development of Spiral Bevel and Hypoid Gears by Applying Optimization Techniques,¡¨ J. of CSME, Vol. 17, No. 5, pp.413-424.

51.       H. S. Fang and C. B. Tsay, 1996, ¡§Effects of the Hob Cutter Regringing and Setting on ZE-Type Worm Gear Manufacture,¡¨ International Journal of Maching Tools and Manufacture, Vol.36, No.10, pp.1123-1135.

52.       S. L. Chang, C. B. Tsay and L. I. Wu, 1996, "Mathematical Model and Undercutting Analysis of Elliptical Gears Generated by Rack Cutters," Journal of Mechanism and Machine Theory, Vol. 31, No. 7, pp. 879-890.

53.       C. Y. Lin, C. B. Tsay and Z. H. Fong, 1996, ¡§ Tooth Contact Analysis of Hypoid Gears,¡¨ J. of CSME, Vol.17, No.3, pp.241-249.

54.       H. S. Fang and C. B. Tsay, 1996, "Mathematical Model and Bearing Contacts of the ZK-type Worm Gear Set Cut by Oversize Hob Cutters," Journal of Mechanism and Machine Theory, Vol. 31, No. 3, pp. 271-282.

55.       H. S. Fang and C. B. Tsay, 1995, "Bearing Contact and Kinematic Error of ZE-type and ZK-type Combination Worm Gear Sets," J. of CSME, Vol.16, No.4, pp. 327-335.

56.       S. L. Chang and C. B. Tsay, 1995, "Mathematical Model of the Elliptical Gear Generated by Shapers," J. of CSME, Vol.16, No.5, pp. 415-423.

57.       C. B. Tsay, J. W. Jeng, and H. S. Feng, 1995, "A Mathematical Model of the ZE-Type Worm Gear Set," Journal of Mechanism and Machine Theory, Vol.30, No.6, pp.777-789.

58.       C. B. Tsay, 1995, " Motion Velocity of the Contact Ellipse Over Wildhaber-Novikov Gears," J. of CSME, Vol. 16, No. 2, pp.123-131.

59.       ªL©¾¹B,½²©¾¨@,¶¾®iµØ,1995, ¡§½½½u³Ê¾¦½üªº¹q¸£»²§U»s³y¡¨,¾÷±ñ¤ë¥Z(²Ä¤Q©¡ª÷µ§¼ú¨Î§@), Vol.21,No.8,pp.360-374.

60.       C. B. Tsay, and H. S. Feng, 1994, "Design of Disk-Type Grinding Wheels for Screw Surfaces Generation,"  Journal of Applied Mechanisms and Robotics ,Vol.1,No.2,pp.41-48.

61.       C. B. Tsay, 1994, " A Study on the Contact of the Wildhaber-Novikov Gear," J. of CSME, Vol. 15, No. 2, pp. 109-117.

62.       C. B. Tsay and S. L. Chang, 1994, " Design of Pencil-Type Milling Cutters for the Worm Surface Generation," J. of Materials Processing Technology, Vol. 42, pp. 361-376.

63.       W. H. Wang, C. H. Tseng, C. B. Tsay, and S. F. Lin, 1993, " On the Manufacturing Tolerance of Disk Cam Profile," J. of Materials Processing Technology, Vol. 38, pp. 71-84.

64.       C. B. Tsay and J. Y. Lin, 1993, "A Mathematical Model for the Tooth Geometry of Hypoid Gears," J. of Mathematical and Computer Modelling, Vol. 18, No. 2, pp. 23-34.

65.       B. W. Bair and C. B. Tsay, 1992.12, "Computer Aided Tooth Contact Analysis of Internal Spur Gears," J. of CSME, Vol. 13, No. 6, pp. 537-546.

66.       Z. H. Fong and C. B. Tsay, 1992.09, "Kinematical Optimization of the Spiral Bevel Gears," Trans. ASME, J. of Mechanical Design, Vol. 114, No. 3, pp. 498-506.

67.       Z. H. Fong and C. B. Tsay, 1992.06, "The Undercutting of Circular-Cut Spiral Bevel Gears," Trans. ASME. J. of Mechanical Design, Vol. 114, No. 2, pp.317-325.

68.       Z. H. Fong and C. B. Tsay, 1991.09, "A Study on the Tooth Geometry and Cutting Machine Mechanisms of Spiral Bevel Gears," Trans. ASME, J. of Mechanical Design, Vol. 113, No. 3, pp. 346-351.

69.       Z. H. Fong and C. B. Tsay, 1991.06, "A Mathematical Model for the Tooth Geometry of Circular-Cut Spiral Bevel Gears,"  Trans. ASME, J. of Mechanical Design, Vol. 113, No. 2, pp. 174-181.

70.       C. B. Tsay and Z. H. Fong, 1991.02, "Computer Simulation and Stress Analysis of Helical Gears with Pinion Circular Arc Teeth and Gear Involute Teeth," J. of Mechanism and Machine Theory. Vol. 26, No. 2, pp. 145-154.

71.       Z. H. Fong and C. B. Tsay, 1990.12, "Tooth Contact Analysis of Spiral Bevel Gears," J. of CSME, Vol. 11, No. 6, pp. 538-544.

72.       C. B. Tsay and C. Y. Yu, 1990.08, "The Mathematical Model of the Gerotor Pump Applicable to Its Characteristic Study," J. of CSME, Vol. 11, No. 4, pp. 385-391.

73.       C. B. Tsay, W. L. Sheu and C. H. Wu, 1990.04, "Spur Gears with Crowned Teeth," J. of CSME, Vol. 11, No. 2, pp. 121-133.

74.       C. B. Tsay and Z. H. Fong and S. Tao, 1989.07, "The Mathematical Model of Wildaber-Novikov Gears Applicable to Finite Element Stress Analysis," International J. of  Mathematical and Computer Modelling, Vol. 12, No. 8, pp. 939-946.

75.       C. B. Tsay and Z. H. Fong, 1989.06, "Tooth Contact Analysis for Helical Gears with Pinion Circular Arc Teeth and Gear Involute Shaped Teeth," Trans. ASME, J. of Mech., Transm., and Automn. in Design, Vol.111, No. 2, pp. 278-284.

76.       C. B. Tsay and C. Y. Yu, 1989.02, "Mathematical Model for the Profile of Gerotor Pumps," J. of CSME, Vol. 10, No. 1, PP. 41-47.

77.       C. B. Tsay, 1988.12, "Helical Gears with Involute Shaped Teeth: Geometry, Computer Simulation, Tooth Contact Analysis and Stress Analysis," Trans. ASME, J. of Mech., Transm., and Automn. in Design, Vol. 110, No. 4, pp. 482-491.

78.       C. B. Tsay and Z. H. Fong, 1988.06, "Characteristic Study of Helical Gears with Pinion Circular Arc Teeth and Gear Involute Teeth," J. of CSME, Vol.9, No. 3, pp. 199-206.

79.       C. B. Tsay, 1988.02, "Computer Simulation and Theoretical Analysis of Involute Helical Gears," J. of CSME, Vol. 9, No. 1, PP. 35-42.

80.       J. L. Meng, K. E. Hsieh and C. B. Tsay, 1987.08, "An Analytical Method for Synthesis of Cam Profiles,", J. of CSME, Vol. 8, No. 4, pp. 271-276.

81.       ½²©¾¨@, 1987¦~3¤ë, "¤Á»sº¥¶}½u¾¦§Î¤§¾¦¤M¤M¨ã³]©w­È±À¾É," ¾÷±ñ¤u·~Âø»x, ²Ä48´Á127-131­¶.

82.       ½²©¾¨@, 1987¦~1¤ë, "¥H¸ÑªRªk¨D¸Ñ¾|¤ó¹ª­·¾÷¸­Ã¤½ü¤§¦@³m¦±½u", ¾÷±ñ¤ë¥ZÂø»x, ²Ä138´Á, ²Ä129-133­¶.

83.       C. B. Tsay, 1987.01, "Equations for Helical Gears with Pinion Circular Arc Teeth and Gear Involute Teeth," Journal of the Chinese Institute of Engineers, Vol. 10, No. 1, PP. 45-51.

84.       F. L. Litvin, W. J. Tsung, J. J. Coy, R. F. Handschuh and C. B. Tsay, 1986, "New Generation Methods for Spur, Helical, and Spiral-Bevel Gears," NASA TM88862 and USAAVSCOM TR 86-C-27, ISSN: 0499-9320, PP. 1-24. Also J. of NASA Tech Briefs Vol.11, No. 12.

85.       ½²©¾¨@, 1986¦~10¤ë, "º¥¶}½u§ÎÁ³±Û¾¦½ü¤§¹q¸£»²§U¾¦½ü±µÄ²¤ÀªR¼ÒÀÀ," ¾÷±ñ¤u·~Âø»x, ²Ä43´Á, ²Ä152-157­¶.

86.       F. L. Litvin, C. B. Tsay, J. J. Coy and R. F. Handschuh, Oct. 1986, "Helical Gears with Pinion Circular Arc Teeth and Gear Screw Involute Teeth," AGMA 1986 Technical Paper No. 86-FTM-3, PP.1-5.

87.       F. L. Litvin and C. B. Tsay, 1985.12, "Helical Gears with Circular Arc Teeth: Simulation of Conditions of Meshing and Bearing Contact," Trans. ASME, J. of Mech., Transm., and Automn. in Design, Vol. 107, No. 4, pp. 556-564.

 B.      CONFERENCE PAPERS

 1.        Chee-Yong, Teo Chung-Biau Tsay, Chun-Hsien Liu and Jia-Bin Hsu, 2005.12.02, ¡§Design of a 

         High Speed Mechanism for Chip¡¦s Pick and Place¡¨, ¤¤µØ¥Á°ê¾÷ºc»P¾÷¾¹­ì²z¾Ç·|²Ä¤K

         ©¡¾÷ºc»P¾÷¾¹³]­p¾Ç³N¬ã°Q·|, ¥x¥_, CD-ROM ½×¤å½s¸¹C01003, ²Ä31-37­¶¡C

2.          ´å©ú¹F, ½²©¾¨@, 2005.11.25-26, ¡§¯»¥½¹ï¯»¥½§Mª÷¥óÁ³±Û¾¦½üºë«×¤§¼vÅT¡¨, ¤¤°ê¾÷±ñ¤uµ{¾Ç·|²Ä¤G¤Q¤G©¡¥þ°ê¾Ç³N¬ã°Q·|, ®ç¶é¤¤Ãc, CD-ROM ½×¤å½s¸¹C6-004,²Ä141-146­¶¡C

3.          »¯¥ßùÖ, ½²©¾¨@, 2005.11.25-26, ¡§²y§Î¾¦½ü¤§¼Æ¾Ç¼Ò¦¡¤Î±µÄ²¤ÀªR¡¨, ¤¤°ê¾÷±ñ¤uµ{¾Ç·|²Ä¤G¤Q¤G©¡¥þ°ê¾Ç³N¬ã°Q·|, ®ç¶é¤¤Ãc, CD-ROM ½×¤å½s¸¹C1-005, ²Ä27-32­¶¡C

4.          C. C. Liu, J. H. Hen, C. B. Tsay and Y. Ariga, 2005.05, ¡§Meshing Simulations of the Worm Gear Cut by a Straight-Edged Flyblade and the ZK-Type Worm with a Non-Ninety-Degree Crossing Angle,¡¨ International Workshop on Computational Kinematics, Cassino, Italy, Paper No.44-CK2005, pp.1-16.

5.          J. T. Tseng and C. B. Tsay, 2005, ¡§Undercutting and Contact Characteristics of Cylindrical Gears with Curvilinear Shaped Teeth Generated by Hobbing,¡¨ ASME 2005 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, California, USA. (accepted)

6.          ¹ù«Ø¶¯, ½²©¾¨@, ¼B®a¹ü, 2004.11, ¡§«D90«×¥æ¿ù¨¤¤§ZN«¬½½½ü»PZK«¬½½±ì¤§±µÄ²¤ÀªR,¡¨ ¤¤µØ¥Á°ê¾÷ºc»P¾÷¾¹­ì²z¾Ç·|²Ä¤C©¡¾÷ºc»P¾÷¾¹³]­p¾Ç³N¬ã°Q·|, ¥x«n¡A²Ä312-319­¶¡C

7.          J. T. Tseng and C. B. Tsay, 2004, ¡§Mathematical Model and Surface Deviation of Cylindrical Gears with Curvilinear Shaped Teeth Cut by a Hob Cutter,¡¨ 7^th Biennial ASME Conference on Engineering Systems Design and Analysis-ESDA 2004, Manchester, UK, CD-ROM Paper No. ESDA-58176, Abstract pp. 104.

8.          C. C. Liu and C. B. Tsay, 2003.12, ¡§Meshing Geometry Analysis for Beveloid Gear Pairs,¡¨ ¤¤µØ¥Á°ê¾÷ºc»P¾÷¾¹­ì²z¾Ç·|²Ä¤»©¡¾÷ºc»P¾÷¾¹³]­p¾Ç³N¬ã°Q·|º[®ü®l¨â©¤¾÷ºc¾Ç¾Ç³N¬ã°Q·|, ¶³ªL¡A²Ä346-353­¶¡C

9.          ³¯¹Å§», ¼B®a¹ü, ½²©¾¨@, 2003.12, ¡§­¸¤M³Ð¦¨¤§½½½ü»PZK½½±ì¤§±µÄ²¤ÀªR¡¨, ¤¤°ê¾÷±ñ¤uµ{¾Ç·|²Ä¤G¤Q©¡¥þ°ê¾Ç³N¬ã°Q·|, ¥x¥_, CD-ROM ½×¤å½s¸¹C01-02, ºK­n²Ä193­¶¡C

10.       ±i§»±l, ¼B®a¹ü, ½²©¾¨@, 2002.11, ¡§¯»¥½§Mª÷¤§¥¿¾¦½üºë«×§ïµ½¡¨, ¤¤°ê¾÷±ñ¤uµ{¾Ç·|²Ä¤Q¤E©¡¥þ°ê¾Ç³N¬ã°Q·|, ½×¤å¶°, ²Ä17-24­¶¡C

11.       ªL©Z½«, ¨HªÃ¼w, ½²©¾¨@, 2001.12, ¡§¾T¦Xª÷´õ¨÷¦¡À£ÁY¾÷¤§¦³­­¤¸¯Àªk¤ÀªR,¡¨ ¤¤µØ¥Á°ê¤O¾Ç¾Ç·|²Ä¤G¤Q¤­©¡¥þ°ê¤O¾Ç·|ij, ¥x¤¤, ²Ä134­¶¡C

12.       ³¯«Øµo, ªL­×¦P, ½²©¾¨@, 2001.12,  ¡§­×¾ã«¬¤Ö¾¦¼ÆÁ³±Û¾¦½ü¤§¼Æ¾Ç¼Ò¦¡»P¹L¤Á¤ÀªR,¡¨ ¤¤°ê¾÷±ñ¤uµ{¾Ç·|²Ä¤Q¤K©¡¥þ°ê¾Ç³N¬ã°Q·|, ¥x¥_¡C

13.       ªL¤å¿«¡A¼B®a¹ü¡A½²©¾¨@¡A2001.12, ¡§¤À¶¥¦¡Âùº¥¶}½u§Î»P¶ê©·§ÎÁ³±Û¾¦½ü¹ï¤§±µÄ²¤ÀªR,¡¨ ¤¤°ê¾÷±ñ¤uµ{¾Ç·|²Ä¤Q¤K©¡¥þ°ê¾Ç³N¬ã°Q·|¡A¥x¥_¡A²Ä555-562­¶¡C

14.       C. P. Chiang, C. H. Tseng and C. B. Tsay, 2000.12, ¡§The Setting of Auxiliary Centrodes to Avoid Singularity Occurred on Double Cycloidal Gears,¡¨ ¤¤µØ¥Á°ê¾÷ºc»P¾÷¾¹­ì²z¾Ç·|²Ä¤T©¡¥þ°ê¾÷ºc»P¾÷¾¹³]­p¾Ç³N¬ã°Q·|, °ª¶¯, ²Ä95-102­¶¡C

15.       ¹ù¤W¥­, ¼B®a¹ü, §d«TÀs, ½²©¾¨@, 2000.12, ¡§¥Hºu¾¦³Ð¦¨¤§Helipoid¾¦½üªº±µÄ²¾¦¦L¤ÀªR,¡¨ ¤¤°ê¾÷±ñ¤uµ{¾Ç·|²Ä¤Q¤C©¡¥þ°ê¾Ç³N¬ã°Q·|, °ª¶¯, ²Ä555-562­¶¡C

16.       ¥Õ¬±¤å, ½²©¾¨@, 2000.12, ¡§Âù¾Éµ{½½½ü³]­p°Ñ¼Æ¹ï¾¦­±ªº¼vÅT,¡¨ ¤¤°ê¾÷±ñ¤uµ{¾Ç·|²Ä¤Q¤C©¡¥þ°ê¾Ç³N¬ã°Q·|, °ª¶¯, ²Ä571-578­¶¡C

17.       ½²©¾¨@, 2000.12, ¡§¶ê©·¾¦§ÎÁ³±Û¾¦½ü¤§³]­p,¡¨ ºë±KÅܳt¾÷§Þ³N¬ã°Q·|, ¤u·~§Þ³N¬ã¨s°|¾÷±ñ©Ò, ·s¦Ë, ²Ä1-55­¶¡C

18.       C. C. Liu and C. B. Tsay, 2000.09, ¡§Tooth Undercutting of Beveloid Gears,¡¨ 8th International Power Transmission and Gearing Conference, Maryland, U. S. A, DETC/2000 CD-ROM Paper No. PTG-14460, Abstract pp. 578

19.       J. S. Lo, C. H. Tseng and C. B. Tsay, 2000.07, ¡§A Study on the Hertzian Stress of the Roller Gear Cam,¡¨ International Conference on Gearing, Transmission and Mechanical Systems, pp. 675-685, Nottingham, U.K.

20.       Y. C. Chen and C. B. Tsay, 1999.12, ¡§Divulgence Thermal Expansion of Root¡¦s Pumps,¡¨ 16^th National Conference on Mechanical Engineering, CSME, Hsinchu, pp. 415-421.

21.       J. L. Chen, C. H. Tseng and C. B. Tsay, 1999.12, ¡§Tooth Contact Analysis of the Involute Spur Planetary Gear Train with a Crowned Planetary Gear,¡¨ 16 th National Conference on Mechanical Engineering, CSME, Hsinchu, pp. 421-428.

22.       J. S. Lo, C. H. Tseng and C. B. Tsay, 1999.12, ¡§The Analysis Kinematic Errors for the Roller Gear Cam with Camber Follower,¡¨ The second National Conference on the Design of Mechanisms and Machines, pp. 250-258, Hsinchu, Taiwan.

23.       C. K. Chang and C. B. Tsay, 1999.12, ¡§Mathematical Model of Straight Bevel Bevel Gears with Octoid Form,¡¨ 16 th National Conference on Mechanical Engineering, CSME, Hsinchu, pp. 482-489.

24.       ½²©¾¨@, ¥Õ¬±¤å, 1999.12, ¡§ZK«¬Âù¾Éµ{½½½ü²Õ¯S©Ê¬ã¨s»P¹L¤Á¤ÀªR¡¨, ¤¤µØ¥Á°ê¾÷ºc»P¾÷¾¹­ì²z¾Ç·|²Ä¤G©¡¥þ°ê¾÷ºc»P¾÷¾¹³]­p¾Ç³N¬ã°Q·|, ·s¦Ë, ²Ä259-264­¶¡C

25.       ½²©¾¨@, ¼B®a¹ü, 1999.12, ¡§Helipoid¾¦½ü¤§¦±²v»P±µÄ²¾¦¦L¡¨, ¤¤µØ¥Á°ê¾÷ºc»P¾÷¾¹­ì²z¾Ç·|²Ä¤G©¡¥þ°ê¾÷ºc»P¾÷¾¹³]­p¾Ç³N¬ã°Q·|, ·s¦Ë, ²Ä295-301­¶¡C

26.       H. S. Fang and C. B. Tsay, 1999.06, ¡§Mathematical Model and Bearing Contacts of the ZN-Type Worm Gear Set Cut by Oversize Hob Cutter,¡¨  10 th World Congress on the theory of Machine and Mechanisms, Oulu, Finland, pp. 2270-2275.

27.       J. L. Chen, C. H. Tseng and C. B. Tsay, 1998.11, ¡§Computer-Aided Simulation on the Involute Spur Planetary Gear Train,¡¨ 15 th National Conference on Mechanical Engineering, CSME, Tainan, pp. 51-58.

28.       ½²©¾¨@, ´¿·ç°ó, 1998.11, "º¥¶}½u»PÂ\½u¾¦½ü²Õ¤§±µÄ²¤ÀªR,"  ¤¤°ê¾÷±ñ¤uµ{¾Ç·|²Ä¤Q¤­©¡¥þ°ê¾Ç³N¬ã°Q·|, ¥x«n, ²Ä559-565­¶¡C

29.       ½²©¾¨@, ±i§Á±d, 1998.11, "°wª¬¾¦½ü¤§¼Æ¾Ç¼Ò¦¡±À¾É»P¯S©Ê¤ÀªR,"  ¤¤°ê¾÷±ñ¤uµ{¾Ç·|²Ä¤Q¤­©¡¥þ°ê¾Ç³N¬ã°Q·|, ¥x«n, ²Ä9-15­¶¡C

30.       ½²©¾¨@, ³¯­§«C, 1998.11, "¾|¤ó¹ª­·¾÷¸­½ü½u§Î¯S©Ê¬ã¨s,"  ¤¤µØ¥Á°ê¾÷ºc»P¾÷¾¹­ì²z¾Ç·|²Ä¤@©¡¥þ°ê¾÷ºc»P¾÷¾¹³]­p¾Ç³N¬ã°Q·|, ¥x«n, ²Ä173-179­¶¡C

31.       ½²©¾¨@¡A1996.12 ¡§º¥¶}½u½½±ì»P½½½ü³]­p»P¤ÀªR¡¨¡A¾÷ºc»P¾÷¾¹­ì²z¾Ç³N¬ã°Q·|¡A°ª¶¯

32.       C. B. Tsay, 1996.12 ¡§Tooth Contact Analysis and Kinematical Optimization of Hypoid Gears(I)¡¨¡A¾÷ºc»P¾÷¾¹­ì²z¾Ç³N¬ã°Q·|¡A°ª¶¯

33.       ½²©¾¨@¡A1996.12 ¡§CNCºu¾¦¾÷¤§ºu«d¼ÒÀÀ»P·s«¬¾¦½ü¤§¬ã¨s¡]I¡^¡¨¡A°ê¬ì·|©T¤O»P¦Û°Ê¤Æ¾Çªù¬ã¨s¦¨ªG¬ã°Q·|¡A°ª¶¯

34.       ½²©¾¨@¡A1996.12 ¡§´u¾¦½ü¤§¾¦½ü±µÄ²¤ÀªR¤Î¨ä³Ì¨Î¤Æ¡]II¡^¡¨¡A°ê¬ì·|©T¤O»P¦Û°Ê¤Æ¾Çªù¬ã¨s¦¨ªG¬ã°Q·|¡A°ª¶¯

35.       S. L. Chang, C. B. Tsay and C. H. Tseng, 1996.11, ¡§A Study on Kinematic Optimization of a Simple  Helical-Gear Trains,¡¨ 13rd National Conf. of CSME, Taipei, pp.305-312.

36.       W. H. Wang, C. H. Tseng, and C. B. Tsay, 1996. 11, ¡§The Analysis of Preload Condition in Spatial Cam Mechanisms, ¡§13rd National Conf. of CSME, Taipei, pp.290-297.

37.       C. Y. Lin, C. B. Tsay and Z. H. Fong, 1996.11, ¡§Contact Pattern Development of Spiral Bevel and Hypoid Gears by Applying Optimization Technology,¡§ 13rd National Conf. of CSME, Taipei, pp.282-289.

38.       S. L. Chang, C. B. Tsay, and C. H. Tseng, 1996. 10,¡§Kinematic Optimization of a Modified Helical Gear Train,¡¨ 7th International Power Transmission and Gearing Conference, San Diego, U. S. A, pp. 477-484 .

39.       H. S. Fang and C. B. Tsay, 1996.05, ¡§Object-Oriented Simulation Applicable to the Tooth Contact Analysis of Worm Gear Sets¡¨,ISATED International Conference of Modeling, Simulation and Optimization, Paper No. 242-067, Gold Coast, Australia.

40.       W.H. Wang, C.H. Tseng and C.B. Tsay, 1996.05, ¡§Optimum Design of a Spatial Cam Mechanism,¡¨ IASTED International Conference of Modeling, Simulation and Optimization, Paper No.242-068, Gold Coast, Australia.

41.       H.S. Fang and C. B. Tsay, 1995.11, ¡§Bearing Contact and Kinematic Error of ZE-type and ZK-type Combination Worm Gear Sets,¡¨12th Nat. Conf. of CSME, Chai-Yi, pp. 141-149.

42.       S. L. Chang and C. B. Tsay, 1995.11,¡§Mathematical Model of the Elliptical Gear Generated by Shapers,¡¨12th Nat. Conf. of CSME, Chai-Yi, pp. 111-118. 

43.       ½²©¾¨@¡A1995.10 ¡§º¥¶}½u½½±ì»P½½½ü³]­p»P¤ÀªR(II)¡¨¡A¾÷ºc»P¾÷¾¹­ì²z¾Ç³N¬ã°Q·|¡A·s¦Ë

44.       S. L. Chang, C. B. Tsay, and L. I. Wu, 1995.09 ¡§Mathematical Model and Undercutting Analysis of Elliptical Gears Generated by Rack Cutter,¡¨ Ninth World Congress on the Theory of Machines and Mechanisms,  Milano, Italy, pp.600-604. 

45.       C. F. Lai, Y. C. Hou, C. H. Tseng, and C. B. Tsay, 1994. 12, "Optimum Design of the Extended Involute Scroll Curve," Proceeding of the 8th National Conference on Theoretical and Applied Mechanics, Hsinchu, , pp. 321-328.

46.       ½²©¾¨@¡A1994.10 ¡§º¥¶}½u½½±ì»P½½½ü³]­p»P¤ÀªR(I)¡¨¡A¾÷ºc»P¾÷¾¹­ì²z¾Ç³N¬ã°Q·|¡A·s¦Ë¡¨

47.       ½²©¾¨@¡A1994.10 ¡§´u¾¦½ü¤§§¹¾ã¾¦­±¼Æ¾Ç¼Ò¦¡¬ã¨s¡¨¡A¾÷ºc»P¾÷¾¹­ì²z¾Ç³N¬ã°Q·|¡A·s¦Ë¡¨

48.       ±i«H¨},½²©¾¨@,´¿ÀA·Ø¡A1994. 5 "Á³±Û¾¦½ü¨t¤§¾¦§Î°Ñ¼Æ³ÌÀu¤Æ¡A" 94¦~¥þ°ê¾÷ºc¾Ç¾Ç³N°Q½×·|¡A«n¨Ê¡A¤¤°ê¡A²Ä137-140­¶¡C

49.       ½²©¾¨@, 1994.4, ¡§¹ï°¸³Ð¦¨½½±ì²Õ¤§³]­p»P¤ÀªR,¡¨ ¾¦½ü¥«³õ, ³]­p»P»s³y§Þ³N¬ã°Q·|, ¤u·~§Þ³N¬ã¨s°|¾÷±ñ©Ò, ·s¦Ë, ²Ä27-52­¶¡C

50.       ±i«H¨}, ½²©¾¨@, ´¿ÀA·Ø, 1993.12, "Á³±Û¾¦½ü¨t¤§¹B°Ê»~®t³Ì¨Î¤Æ,"  ¤¤°ê¾÷±ñ¤uµ{¾Ç·|²Ä¤Q©¡¥þ°ê¾Ç³N¬ã°Q·|, ¾÷³]²Õ½×¤å¶°¡A·s¦Ë, ²Ä231-240­¶.

51.       ½²©¾¨@, ¾G¶v¤å, 1993.12, " E «¬½½±ì½½½ü¤§´X¦ó¼Æ¾Ç¼Ò¦¡,"  ¤¤°ê¾÷±ñ¤uµ{¾Ç·|²Ä¤Q©¡¥þ°ê¾Ç³N¬ã°Q·|, ¾÷³]²Õ½×¤å¶°, ²Ä367-374­¶.

52.       W. H. Wang, C. H. Tseng, C. B. Tsay, and S. F. Lin, 1993, " On the Manufacturing Tolerance of Disk Cam Profile," Pacific Conference on Materials Processing Feb. 23-25, Singapore, pp. 71-84.

53.       C. B. Tsay and S. L. Chang, 1992.11, "Design of Pencil-Type Milling Cutter for Generation of Worm Surfaces," 9th Nat. Conf. of CSME, Kaohsiung, pp. 377-384.

54.       C. B. Tsay and H. S. Feng, 1992.11, "Design of Disk-Type Grinding Wheels for Screw Surface Generation," 9th Nat. Conf. of CSME, Kaohsiung, pp. 351-358.

55.       ¤ýºûº~, ´¿ÀA·Ø, ½²©¾¨@, 1992.11, "¥ßÅé¥Y½ü½ü¹ø¦±­±¤§«Ø¥ß,"  ¤¤°ê¾÷±ñ¤uµ{¾Ç·|²Ä¤E©¡¥þ°ê¾Ç³N¬ã°Q·|,°ª¶¯, ²Ä297-304­¶.

56.       Z. H. Fong and C. B. Tsay, 1992.09, "Kinematical Optimization of Spiral Bevel Gears," ASME 6th International Power Transmission and Gearing Conference, Phoenix, U.S.A., Vol. 1, pp. 221-228.

57.       ¤ýºûº~, ´¿ÀA·Ø, ½²©¾¨@, 1991.12, "¥­­±¥Y½ü½ü¹ø¦±½u³]­p»s³y¤½®t¤§¤ÀªR," ²Ä¤Q¤­¥þ°ê¤O¾Ç·|ij¡A¥x«n¡A ²Ä527-536­¶.

58.       Z. H. Fong and C. B. Tsay, 1991.11, "A Study on the Tooth Geometry and Cutting Machine Mechanics of Spiral Bevel Gears," 8th Nat. Conf. of CSME, Vol. 3, pp. 1361-1368.

59.       C. B. Tsay and J. Y. Lin, 1991.11, "A Mathematical Model of the Tooth Geometry of Hypoid Gears," 8th Nat. Conf. of CSME, Taipei, Vol. 3, pp. 1369-1376.

60.       Z. H. Fong and C. B. Tsay, 1990.11, "A Study on the Undercutting of Circular-Cut Spiral Bevel Gears," 1990 NSC-NSF Joint Seminar on Recent Developments in Mechanical Design, Taiwan, pp. 193-202.

61.       Z. H. Fong and C. B. Tsay, 1990.11, "Tooth Contact Analysis of Spiral Bevel Gears," 7th Nat. Conf. of CSME, Hsinchu, Vol. 3, pp. 1713-1720.

62.       C. Y. Yu and C. B. Tsay, 1989.12, "The Mathematical Model of Gerotor Pump Applicable to Its Characteristics Study," 6th Nat. Conf. of CSME, Tainan, Vol. 3, pp. 1421-1430

63.       C. B. Tsay and B. W. Bair, 1989.07, " Theoretical Analysis of Internal Involute Spur Gears," The 5th IFToMM International Symposium on Linkage and Computer Design Methods, Bucharest, Romania.

64.       C. B. Tsay, 1989.04, "Helical Gears with Involute Shaped Teeth: Geometry, Computer Simulation,Tooth Contact Analysis and Stress Analysis," ASME 5th International Power Transmission and Gearing Conference, Chicago, U.S.A., Vol. 2, pp. 563-573.

65.       C. B. Tsay and B. W. Bair, 1988.12, "Tooth Contact Analysis of Internal Involute Spur Gears," 5th Nat. Conf. on Mech. Eng. CSME, Taipei, PP. 1251-1260.

66.       C. B. Tsay, Z. H. Fong and S. Tao, 1988.12, "Finite Element Stress Analysis of Wildhaber-Novikov Gears," 5th Conf. on Mech. Eng. CSME, Taipei, PP. 1261-1268.

67.       C. B. Tsay, 1988.09, "Gerotor Pumps-Design, Simulation and Contact Analysis," 1988 ASME Design Mechanism Conference, FL., U.S.A., DE-Vol. 15-2, PP. 349-356.

68.       C. B. Tsay, 1988.09, " Computer Aided Design of Internal Involute Spur Gears," 1988 ASME Design Automation Conference, FL., U.S.A., DE-Vol. 14, PP. 353-358.

69.       C. B. Tsay, 1988.08, "Computer Aided Design of Internal Involute Spur Gears," the 1988 ASME International Computers in Engineering Conference, CA. U.S.A., Vol. 2, PP. 97-102.

70.       C. B. Tsay, 1988.04, "Gerotors-Design,Simulation and Contact Analysis," the 2nd International Symposium on Transport Phenomena, Dynamics, and Design of Rotating Machinery, Hawaii, U.S.A., Vol. 2, PP. 393-407.

71.       C. B. Tsay and C. Y. Yu, 1987.12, "Equations for Internal Involute Spur Gears," 11th Nat. Conf. on Theoretical and Applied Mechanics, Chung-Li, pp.1137-1143.

72.       C. B. Tsay and Z. H. Fong, 1987.12, "Tooth Contact Analysis for Helical Gears with Pinion Circular Arc Teeth and Gear Involute Shaped Teeth," 4th Nat. Conf. on Mech. Eng. CSME, Hsinchu, pp. 1147-1153.

73.       C. B. Tsay, 1987.07, "Computer Aided Simulation of Tooth Contact Analysis for Helical Gears with Involute Shaped Teeth," 2nd International Conf. on NUMETA 1987, Swansea, U.K., Vol. 1, pp. D27/1-8.

74.       J. L. Meng, K. E. Hsieh and C. B. Tsay, 1986.12, "An Analytical Method for Synthesis of Cam Profiles," 3rd Nat. Conf. on Mech. Eng. CSME, Chung-Li, pp.515-521.

75.       C. B. Tsay, 1986.12, "Derivation of Equations for Helical Gears with Pinion Circular Arc Teeth and Gear Screw Involute Teeth," 3rd Nat. Conf. on Mech. Eng. CSME, Chung-Li, pp. 535-542.

76.       ½²©¾¨@,³¯¬·¹ü,³³®¤,¾HªZ©v,¶¾®iµØ, 75¦~11¤ë, "º¥¶}½u§ÎÁ³±Û¾¦½ü¼Æ¾Ç¼Ò¦¡¤§±À¾É," ¤O¾Ç¾Ç·|²Ä¤Q©¡¥þ°ê¤O¾Ç·|ij, °ª¶¯, ²Ä169-175­¶.

77.       F. L. Litvin, W. J. Tsung, J. J. Coy, R. F. Handschuh and C. B. Tsay, 1986.11, " New Generation Methods for Spur, Helical, and Spiral-Bevel Gears," Rotary Wing Propulsion System Specialist Meeting, Virginia, U.S.A., pp.1-24.

78.       ½²©¾¨@,¶¾®iµØ,¾HªZ©v,³¯¬·¹ü,³³®¤, 75¦~11¤ë, " º¥¶}½u§ÎÁ³±Û¾¦½ü¤§¹q¸£»²§U¼ÒÀÀ¾¦½ü±µÄ²¤ÀªR," ¤O¾Ç¾Ç·|²Ä¤Q©¡¥þ°ê¤O¾Ç·|ij, °ª¶¯, ²Ä193-201­¶.

79.       F. L. Litvin, C. B. Tsay, J. J. Coy and R. F. Handschuh, 1986.10, "Helical Gears with Pinion Circular Arc Teeth and Gear Screw Involute Teeth", 1986 AGMA Fall Technical Conference, IL., U.S.A., Paper No. 86-FTM-3.

80.       C. B. Tsay, et al, 1985.07, "Spiral Bevel and Circular Arc Helical Gears:Tooth Contact Analysis and the Effect of Misalignment on Circular Arc Helical Gears," AIAA/SEA/ASME/ASEE 21st Joint Propulsion Conf., CA., Paper No. AIAA-85-1139.

81.       F. L. Litvin, P. Rahman, C. B. Tsay, W. J. Tsung and J. J. Coy, 1985.03, ¡§Computer-Aided Simulation of Kinematical Errors and Bearing Contact for Vehicle Gears, and Their Adjustment to Errors of Manufacturing and Assembly,¡§ International Journal of Vehicle Design and IVAD Congress on Vehicle Design and Component, Vol. 6, No. 4-5, Geneva, Switzland, pp. 630-633.

82.       F. L. Litvin and C. B. Tsay, 1984.10, "Helical Gears with Circular Arc Teeth:Simulation of Conditions of Meshing and Bearing Contact," ASME 1984 Design Engineering Technical Conference, Mass., U.S.A., Paper No.84-DET-175.

C.    µÛ§@Åvµn°O

 1.          ½²©¾¨@¡N¤è§»Án ¡§ZK«¬½½±ì¾¦­±¡¨ ¡M¤º¬F³¡¥x(85)¤ºµÛ¦r²Ä8502142¸¹¡M®Ö­ã¤é´Á85¦~2¤ë9¤é¡C

2.        ¤è§»Án¡N½²©¾¨@, ¡§½½±ì½½½ü¾¦­±±µÄ²¤ÀªR¡¨, ¤º¬F³¡¥x(86)¤ºµÛ¦r²Ä8617282¸¹¡C

¡@

­pµe 
¤Î 
±MÃD¦WºÙ

1.          ½²©¾¨@, 2005¦~7¤ë, ¡§­¸¤M³Ð¦¨¤§½½±ì»PZK«¬½½±ì¤§±µÄ²¯S©Ê¬ã¨s(1/3.)¡¨, °ê¬ì·|¬ã¨s³ø§i, NSC-93-2212-E-009-016.

2.          ½²©¾¨@, 2005¦~7¤ë,¡§¦±½u¾¦¶ê¬W«¬¾¦½ü¯S©Ê¬ã¨s(2/3)¡¨, °ê¬ì·|¬ã¨s³ø§i, NSC-93-2212-E-009-009.

3.          ½²©¾¨@, 2004¦~7¤ë, "º¥¶}½u¶êÀ@¾¦½ü¯S©Ê¬ã¨s(3/3)", °ê¬ì·|¬ã¨s³ø§i, NSC-92-2212-E009-033.

4.          ½²©¾¨@, 2004¦~7¤ë, "¦±½u¾¦¶ê¬W«¬¾¦½ü¯S©Ê¬ã¨s(1/3)", °ê¬ì·|¬ã¨s³ø§i, NSC-92-2212-E009-032,    pp. 1-10.

5.          ½²©¾¨@, 2003¦~7¤ë, "º¥¶}½u¶êÀ@¾¦½ü¯S©Ê¬ã¨s(2/3)", °ê¬ì·|¬ã¨s³ø§i, NSC-91-2212-E009-031,    pp. 1-8.

6.          ½²©¾¨@, 2002¦~7¤ë, "º¥¶}½u¶êÀ@¾¦½ü¯S©Ê¬ã¨s(1/3)", °ê¬ì·|¬ã¨s³ø§i, NSC-90-2212-E009-036,    pp. 1-7.

7.          ½²©¾¨@, 2001¦~7¤ë, "­×¾ã§ÎÁ³±Û¾¦½ü¶Ç°Ê¯S©Ê¬ã¨s", °ê¬ì·|±MÃD¬ã¨s³ø§i, NSC 89-2212-E009-084, PP. 1-7.

8.          ½²©¾¨@, 2001¦~7¤ë, "ZK«¬Âù¾Éµ{½½½ü²Õ¯S©Ê¬ã¨s»P±Ó·P©Ê¤ÀªR(III)", °ê¬ì·|±MÃD¬ã¨s³ø§i, NSC 90-2212-E009-075, PP. 1-5.

9.          ½²©¾¨@, 2000¦~10¤ë, "¶ê©·§ÎÁ³±Û¾¦½ü¤§ï¿¦X¯S©Ê¤Î¶q´ú§Þ³N¬ã¨s", ¤u·~§Þ³N¬ã¨s°|¾÷±ñ©Ò©e°U¾Ç³N¾÷ºc¬ã¨s³ø§i, pp.1-85

10.       ½²©¾¨@, 2000¦~7¤ë, "ZK«¬Âù¾Éµ{½½½ü²Õ¯S©Ê¬ã¨s»P±Ó·P©Ê¤ÀªR¡]II¡^", °ê¬ì·|±MÃD¬ã¨s³ø§i, NSC 89-2212-E009-012, PP. 1-5.

11.       ½²©¾¨@, 2000¦~7¤ë, "Helipoid¾¦½ü¯S©Ê¤ÀªR»P¬ã¨s¡]II¡^", °ê¬ì·|±MÃD¬ã¨s³ø§i, NSC 89-2212-E009-013, PP. 1-5.

12.       ½²©¾¨@, 1999¦~7¤ë, "ZK«¬Âù¾Éµ{½½½ü²Õ¯S©Ê¬ã¨s»P±Ó·P©Ê¤ÀªR¡]I¡^", °ê¬ì·|±MÃD¬ã¨s³ø§i, NSC 88-2212-E009-018, PP. 1-5.

13.       ½²©¾¨@, 1999¦~7¤ë, "Helipoid¾¦½ü¯S©Ê¤ÀªR»P¬ã¨s¡]I¡^", °ê¬ì·|±MÃD¬ã¨s³ø§i, NSC 88-2212-E009-006, PP. 1-5.

14.       ½²©¾¨@, 1999¦~2¤ë, "«D¶ê§Î¾¦½ü¤§¬ã¨s", °ê¬ì·|¤uµ{¬ì§Þ³q°T, ²Ä¤T¤Q¤­´Á, pp.85-87.

15.       ½²©¾¨@, 1998¦~8¤ë, ¡§ ¥æ³q¤j¾Ç¾¦½ü¬ã¨s«Ç²¤¶¡¨ , Newsletter of the Chinese Society of Mechanism and Machine Theory, Vol.9, No.5. pp.20-25.

16.       ½²©¾¨@, 1998¦~7¤ë, ¡¨ CNCºu¾¦¾÷¤§ºu«d¼ÒÀÀ¤Î·s«¬¾¦½ü¤§¬ã¨s(III) ¡¨,°ê¬ì·|±MÃD¬ã¨s³ø§i, NSC 87-2212-E009-020.

17.       ½²©¾¨@, 1998¦~7¤ë, ¡§ «D¶ê§Î¾¦½ü¤§¬ã¨s(II)-Á`­pµe ¡§, °ê¬ì·|±MÃD¬ã¨s³ø§i, NSC 87-2212-E009-011.

18.       ½²©¾¨@, 1998¦~7¤ë, ¡§ «D¶ê§Î¾¦½ü¤§¬ã¨s(II)-¤l­pµe¤G¡G«D¶ê§Î¾¦½ü¤§»s³yº[¹L¤Á¤ÀªR, ¡§ °ê¬ì·|±MÃD¬ã¨s³ø§i, NSC 87-2212-E009-013.

19.       ½²©¾¨@, 1998 ¦~ 6 ¤ë, "­t¸ü¤UÁ³±Û¾¦½ü¤§ø¥¦X¾¦¦L¤ÀªR", ¤u¬ã°|¾÷±ñ©Ò©e°U¬ã¨s®×³ø§i, pp.1-54.

20.       ½²©¾¨@, 1997¦~7¤ë, ¡¨ CNCºu¾¦¾÷¤§ºu«d¼ÒÀÀ¤Î·s«¬¾¦½ü¤§¬ã¨s(II) ¡¨,°ê¬ì·|±MÃD¬ã¨s³ø§i, NSC 86-2212-E009-005, PP. 1-52

21.       ½²©¾¨@, 1997¦~7¤ë, ¡§ «D¶ê§Î¾¦½ü¤§¬ã¨s(I)-Á`­pµe ¡§, °ê¬ì·|±MÃD¬ã¨s³ø§i, NSC 86-2212-E009-034, PP. 1-16.

22.       ½²©¾¨@, 1997¦~7¤ë, ¡§ «D¶ê§Î¾¦½ü¤§¬ã¨s(I)-¤l­pµe¤G¡G«D¶ê§Î¾¦½ü¤§»s³yº[¹L¤Á¤ÀªR, ¡§ °ê¬ì·|±MÃD¬ã¨s³ø§i, NSC 86-2212-E009-035, PP. 1-58.

23.       ½²©¾¨@, 1997 ¦~ 6 ¤ë, "¥­¦æ¶b¦h¶¥´î³t¾¦½ü¨t²Î«ù©Ê¬ã¨s", ¤u¬ã°|¾÷±ñ©Ò©e°U¬ã¨s®×³ø§i, pp.1-54.

24.       ½²©¾¨@, 1996¦~8¤ë, ¡¨CNCºu¾¦¾÷¤§ºu«d¼ÒÀÀ¤Î·s«¬¾¦½ü¤§¬ã¨s(I)¡¨,°ê¬ì·|±MÃD¬ã¨s³ø§i, NSC 85-2212-E009-010, PP. 1-19.

25.       ½²©¾¨@, 1996¦~8¤ë, ¡§´u¾¦½ü¤§¾¦½ü±µÄ²¤ÀªR¤Î¨ä³Ì¨Î¤Æ( = 2 \* ROMAN II) ¡§ , °ê¬ì·|±MÃD¬ã¨s³ø§i, NSC 85-2212-E009-009, PP.1-33.

26.       ½²©¾¨@, 1996 ¦~ 6 ¤ë, "Âù¾Éµ{½½½ü²Õ»s³y»~®t¹ï¶Ç°Ê»~®t±Ó·P©Ê¤ÀªR", ¤u¬ã°|¾÷±ñ©Ò©e°U¬ã¨s®×³ø§i, pp.1-53.

27.       ½²©¾¨@, 1996 ¦~ 6 ¤ë, "«D¹ï°¸³Ð¦¨½½±ì½½½ü²Õ¤§ï¿¦X¾¦¦L³Ì¨Î¤Æ»P¾¦­±­×¾ã", ¤u¬ã°|¾÷±ñ©Ò©e°U¬ã¨s®×³ø§i, pp.1-46.

28.       ±i«H¨}, ½²©¾¨@, 1996¦~2¤ë, ¡§ «D¶ê§Î¾¦½ü¤§¤¶²Ð¤Î¤Á«d¤M¨ãªº¿ï¾Ü¡¨ , Newsletter of the Chinese Society of Mechanism and Machine Theory, pp.1-6.

29.       ½²©¾¨@, ´¿ÀA·Ø, 1996¦~4¤ë, ¡§ ¾÷±ñ³]­p»P¹ê§@½Òµ{³W¹º-»]¨T¾÷Ãö¨® ¡§, °ê¬ì·|±MÃD¬ã¨s³ø§i, NSC 84-2512-S-009-001, PP. 1-23.

30.       ½²©¾¨@, 1996¦~2¤ë, "¾¦½ü¬ã¨s«Ç²¤¶", °ê¬ì·|¤uµ{¬ì§Þ³q°T, ²Ä¤Q¥|´Á, pp.7-12.

31.       ½²©¾¨@, 1995 ¦~ 8 ¤ë, "º¥¶}½u½½±ì»P½½½ü¤§³]­p»P¤ÀªR(III)", °ê¬ì·|±MÃD¬ã¨s³ø§i,  NSC 84-2212-E009-016, pp.1-50.

32.       C. B. Tsay, 1995.08, "Tooth Contact Analysis and Kinematical Optimization of Hypoid Gears(I)," NSC report, NCS 84-2212-E009-018, pp.1-30.

33.       ½²©¾¨@, 1995 ¦~ 6 ¤ë, "«D¹ï°¸³Ð¦¨ZK«¬½½±ì»PZN«¬½½½ü¤§³]­p»P￦X¼ÒÀÀ", ¤u¬ã°|¾÷±ñ©Ò©e°U¬ã¨s®×³ø§i, pp.1-55.

34.       ½²©¾¨@, 1994 ¦~ 6 ¤ë, "K«¬½½±ì»P½½½ü¤§¾¦­±±µÄ²¤ÀªR»P¾¦¦L³Ì¨Î¤Æ", ¤u¬ã°|¾÷±ñ©Ò©e°U¬ã¨s®×³ø§i, pp. 1-36.

35.       ½²©¾¨@, 1994 ¦~ 7 ¤ë, "º¥¶}½u½½±ì»P½½½ü¤§³]­p»P¤ÀªR(¢º)", °ê¬ì·|±MÃD¬ã¨s³ø§i,  NSC 83-0422-E009-067, pp.1-52.

36.       ½²©¾¨@, 1993 ¦~ 7 ¤ë, "º¥¶}½u½½±ì»P½½½ü¤§³]­p»P¤ÀªR(¢¹)", °ê¬ì·|±MÃD¬ã¨s³ø§i,  NSC 82-0422-E009-14, pp.1-61.

37.       ½²©¾¨@, 1993 ¦~ 7 ¤ë, "´u¾¦½ü¤§§¹¾ã¾¦­±¼Æ¾Ç¼Ò¦¡¬ã¨s", °ê¬ì·|±MÃD¬ã¨s³ø§i,  NSC 82-0422-E009-071, pp.1-32.

38.       ½²©¾¨@,´¿ÀA·Ø, 1993 ¦~ 7 ¤ë, " K «¬½½±ì»P½½½ü¤§¤Á«d¼ÒÀÀ»P¿i½ü³]­p",  ¤u¬ã°|©e°U¬ã¨s®×³ø§i, pp.1-45.

39.       ´¿ÀA·Ø,½²©¾¨@, 1993 ¦~ 7 ¤ë, "¦Û¦æ¨®Åܳt¾¹­¸½ü²Õ¤§¾¦§Î³Ì¨Î¤Æ¬ã¨s ",  ¤u¬ã°|©e°U¬ã¨s®×³ø§i, pp.1-.

40.       ½²©¾¨@, 1993 ¦~ 6 ¤ë, "¾Ô¥Ò¨®¥Î°ª­t¸ü¶ê©·§ÎÁ³±Û¾¦½ü¤§¼í·Æ¤ÀªR", °ê¨¾±MÃD¬ã¨s³ø§i¦@ 31 ­¶¡A MIST-F82.

41.       ½²©¾¨@, 1992¦~11¤ë, "¾Ô¥Ò¨®¥Î°ª­t¸ü¶ê©·§ÎÁ³±Û¾¦½ü￦X¾¦¦L¤ÀªR", °ê¨¾±MÃD¬ã¨s³ø§i¦@24­¶, MIST-F81021.

42.       C. B. Tsay, 1992.08, "Tooth Contact Analysis and Kinematical Optimization of Spiral Bevel Gears," Report, NSC-81-0422-E-009-02, pp. 1-52.

43.       ½²©¾¨@, ´¿ÀA·Ø, 1992¦~5¤ë, "©µ¦ùº¥¶}½u§Î´õ¨÷¤§´X¦ó¼Ò¦¡¬ã¨s", ¤u¬ã°|©e°U¬ã¨s®×³ø§i, pp.1-46.

44.       ½²©¾¨@¡N´¿¥þ½÷,1991¦~9¤ë."½½½u±×¾¦½ü¾¦§Î¤§¹q¸£»²§U¼ÒÀÀ±µÄ²¤ÀªR",°ê¬ì·|±MÃD¬ã¨s³ø§i, NSC-80-0115-c009-02, pp. 1-69.

45.       ´¿ÀA·Ø¡N½²©¾¨@, 1991¦~9¤ë. "°ªºë«×¥­­±¥Y½ü½ü¹ø¦±½u³Ì¨Î¤Æ³]­p", ¤u¬ã°|©e°U¬ã¨s®×³ø§i, pp.1-76.

46.       C. B. Tsay, 1991.08, "Characteristic Study, Contact Analysis, and Stress Analysis of Helical Gears with Involute Shaped Teeth (II)," Report, NSC-80-0401-E009-12, pp.1-87.

47.       ½²©¾¨@, 1991¦~7¤ë. "¼v¹³³B²z§Þ³N¹B¥Î©ó¥Ø¼Ð¿ëÃÑ", °ê¨¾±MÃD¬ã¨s³ø§i¦@28­¶, MIST-F80013.

48.       C. B. Tsay, 1990.10, "Tooth Contact Analysis and Stress Analysis of Spur Gears (II)," Technical report, TR-MIST-M79001, pp. 1-68.

49.       C. B. Tsay, 1990.08, "A Study on the Mathematical Model for the Complete Tooth Geometry of Circular-Cut Spiral Bevel Gears," Report, NSC-79-0401-E009-05, pp. 1-68.

50.       C. B. Tsay, 1990.02, "Characteristic Study, Contact Analysis, and Stress Analysis of Helical  Gears with Involute Shaped Teeth (I)," Report, NSC-78-0401-E009-01, pp. 1-42.autonum 1

51.       C. B. Tsay, 1989.08, "Characteristics Study and Stress Analysis of Helical Gears with Pinion  Circular Arc Teeth and Gear Involute Shaped Teeth(II)," Report, NSC-78-0401-E009-01, pp. 1-66.

52.       C. B. Tsay, 1989.07, "Tooth Contact Analysis and Stress Analysis of Spur Gears (I)," Technical Report, TR-MIST-M7803, PP. 1-54.

53.       C. B. Tsay, 1988.07, " Characteristics Studies and Stress Analysis of Pinion Circular Arc Teeth, and Gear Involute Teeth (I)," Report, NSC-77-0401-E009-03, PP. 1-58.

54.       C. B. Tsay, 1988.07, "Spur Gears with Crowned Pinion Teeth," Technical Report, TR-MIST-M76002, pp. 1-53.

55.       C. B. Tsay and J. L. Meng, 1987.07, "Characteristics Studies and Stress Analysis of Circular Arc Helical Gears," NSC Report, NSC-76-0401-E009-03, pp. 1-58.

56.       F. L. Litvin and C. B. Tsay, 1987.10, ¡§Helical Gears with Circular Arc Teeth: Generation, Geometry, Precision and Adjustment to Errors, Computer Aided Simulation of Conditions of Meshing, and Bearing Contact,¡¨ NASA Contractor Reports (91P.) ISSN: 0565-7059 Coden: NSCRAQ.

57.       ½²©¾¨@,¹ù«n´Ë, 75¦~7¤ë, "¨T¾÷¨®ªo½c®e¶q,¥i¥Î¶q,©³ªo¶q¤Î¥[ªo¶q»P ªo¶q«ü¥Ü¿öÃö«Y¤§¬ã¨s", ¤¤ªo¤½¥q©e°U¬ã¨s, ¬ã¨s³ø§i¦@95­¶.

58.       F. L. Litvin, W. T. Tsung, C. B. Tsay, J. J. Coy and R. F. Handschuh, 1985.06, "Spiral Bevel and Circular Arc Helical Gears: Tooth Contact  Analysis and the Effect of Misalignment on Circular Arc Helical Gears", NASA Technical Memorandum 87013.

¡@

Back